Molybdemum Disulfide on the surface of the bullet acts as a lubricant between the copper bullet jacket and the steel barrel. The result is bullet deformation seems to be more of a swaging and less of a gouging, resulting in less yaw and measurably better ballistic coefficients.

Decrease pressure by 3-5% depending on cartridge, bullet and powder, while only decreasing velocity by 0,5-1,5%, plus reduced metalfouling.

The patented NECO-Coat Process ("Moly Coating/plating") is a method of "impact plating" molybdenum disulfide ("moly," MoS2) into the surface of cast or jacketed bullets, followed by an outer coating of carnauba wax.

Moly coating bullets works best if you've cleaned your bullets first. A clean surface allows the moly to adhere better. I now degrease my bullets before coating them and wish I had all along.

Press-fitting, assembly, metal forming, running-in new or rebuilt equipment; helps prevent cold welding of metal surfaces under static pressure or vibration (fretting corrosion). **Meets MIL-M-7866 (10 oz for ~$36 + shipping)

We burnish it onto your bullets leaving a hard silvery finish. Besides, Moly-Bore Supreme has an extra special ingredient that theirs don't have!